HL-777 Pulling Grip
Pulling Grip Size：1/2”-1”
Grip is used to pull up to 9/16” & 1” diameter wire, cable or fish tape through walls.
Pulling grip attaches to the hole in the tip of the flex bit；wire mesh holds the wire during the pull. Swivel end helps reduce twisting.
● FLEXIBLE SHAFT
● DRILLS HOLES DOWN THE LENGTH OF WALL CAVITIES
● FISH EYE HOLES AT BOTH ENDS
● DULK PROGRAM AVAILABLE
Unique flexible self feeding bits up to 72” long suitable for drilling holes down the length of wall cavities and through hidden studs with no damage to wall board, plaster or any exterior finish.
A self-feeding screw point and an insulated steering guide helps the operator to start and steer the bit while it is hidden inside the wall cavity.
This bit has a hole at the tip and the shank, which allows you to fish wire inside the wall cavity from either direction after drilling.
Pulling Grip Size：1/2”-1”
Grip is used to pull up to 9/16” & 1” diameter wire, cable or fish tape through walls.
Pulling grip attaches to the hole in the tip of the flex bit；wire mesh holds the wire during the pull. Swivel end helps reduce twisting.
